piezoelectric oscillator

... 28Khz Transducer Welding Vibrator Specifications: Model HS-3028-2Z Frequency 28 Khz Output power 400 W Joint bolt 3/8-24UN...

#detail_decorate_root .magic-0{width:750px}#detail_decorate_root .magic-1{overflow:hidden;width:750px;height:405.95399188092017px;margin-top:0;margin-...

...

... Ultrasonic Welding Transducer With PZT4 Black Ceramic Description: The ultrasonic is also called the ultrasonic vibrator. ...

AT Cut Quartz Blanks Used In Oscillators To Microbalances AT-cut quartz crystals are widely used in applications ranging from oscillators to microbala...

...electromagnetic and amplifies the power. The transducer converts high frequency electric energy into ultrasonic vibration. The frequenc...

Crystals BGO(Bi12GeO20) Product Details Bismuth germanate (Bi12GeO20) has high electro-optic coefficients (3.3 pm/V for Bi12GeO20) makin...

...-4 PZT-5 Ultrasonic transducer sheet beauty sheet ceramic wafer ultrasonic 1M 2M 3mhz This specification applies Piezoelec...

...a resonant component made of the effect of quartz crystal. It replaces the LC frequency selection circuit and has a frequency stabili...

... from 1.554 MhZ to 125.000 Mhz FEATURE Compact and thin ceramic package with metalized surface mounting and automatically loaded Reflow s...

Passive type 9V buzzer Φ30*5mm without circuit Description: Piezo buzzer is an electronic device commonly used to produce sou...

... energy into mechanical energy through the ceramic sheet in the handle, so that the jaw at 55.5KHz, and the vibration ampl...

... (OPOs) pumped at 1064 nm. Due to its large electro-optic and acousto-optic coefficients. Gold Coated Lithium Niobate Crystals with elec...

..., circuit, rectifier circuit and microprocessor etc. crystal and circuit generate square wave with a certain ...

...mechanical vibration. 2. These will be amplified by the booster and converter, thus creating a hammer. The converter conv- erts electr...

CSTCR4M00G53-RO Specification of Ceramic Resonator This product specification is applied to the ceramic resonator used for...

... have a frequency of more than 70 kHz, will lose their practicality. Therefore, the thickness of high-frequency ceramics is used for ...

.... A element is used for the transducer. When voltage is applied, the element displaces the transducer by a few micromet...

... tuning fork part induces vibration through an internal device fixed at the bottom end of the fork body. The frequency is...

... crystals are pressed at the root of the fork body, and one group is used as a driver to drive the fork strands to produce vibration; ...