structural steel plate

... ASTM T22 K21590 Description Our company provides ASTM T22 K21590 ASTM T22 S...

... directly or cut from a wide strip of . According to the thickness of , thin <4 mm (the thinest 0.2 mm), medium thick 4~60 mm, extra thick 60~115 mm. The is divided by rolling, hot rolled and...

...quenched and tempered, fine grained with a minimum yield strength of 1 100 MPa (160 ksi) in its delivery condition. 1100MPa struct...

..., Common Carbon S235JR, A283 Grade C, A36, St37-2, A537 Grade 70, SS400, SM400A Name: Carbon ,Co...

.../T700, JIS G3106, EN 10025, EN 10025-2: 2004 Hot rolled products of . Technical delivery conditions for non-alloy structural steel...

... such as Nb, V, Ti to carbon to improve strength and comprehensive performance. ‌Q420B high strength low alloy has high toughness‌, can...

... and work well in different marine ecosystems. This lr shipbuilding is a high-strength grade that is usually hot rolled and possesses g...

EN 10083 41Cr4 / 1.7035 Alloy EN 10204-3.1 Certificated Products Specification of Products Name AISI 51...

... Material:SAE4130,SAE4130 ,SAE4130 alloy Standard:SAE Thickness:Thickness: 6-80mm, Width: 1360-3000mm,...

...sheets, therefore, is the perfect material for extensive use. Some grades of mild sheets are actually called for that reaso...

...sheets, therefore, is the perfect material for extensive use. Some grades of mild sheets are actually called for that reaso...

... Metal Mild Iron Product name Hot Rolled A572Gr50 Metal Mild Iron Standard GB,JIS,DIN,AISI,ASTM Grade ...

... metal material not only has good wear resistance, but also can withstand impact and wear such as falling from a height during the transportation p...

... A36 Carbon Due its mechanical , low carbon are often used as a general-purpose tooling metal because ...

... quality carbon-manganese-silicon in three tensile strength ranges intended primarily for applications at atmosph...

... Large 1mm To 100mm Thickness Hr Carbon Low-alloy are mainly used in the manufacture of Bridges, shi...

...Quenched and tempered to achieve a fine grain and increase strength. Yield strength of 690 MPa. Used in bearing extremely heavy loads, s...

... Sheet Black Iron for Building Material St52-3, St52-3 , and St52-3 sheet are the most often used low ...

Length According To Client Requirements Hot Rolled Q460c Building #detail_decorate_root .magic-0{width:750px}#detail_decorate_r...

42CrMo4 /34CrMo4/ 25CrMo4 Alloy Item SPCC Grade T57 2.8/2.8 Tin Sheet Material Grade SPCC, MR Temper(BA&CA) T1,T2,T3,T4,T...