threading on a manual lathe

High Speed Pipe Turning Oil Country Pipe ing Manual Lathe Machine with Taper Scale Q1319 pipe is mainly used to process shaf...

... Large Machine 3 Meters Product Introduction: This series of horiozntal machine tools are mainly used to under...

...inch ,as well as having all the common functions of normal engine such as processing the inner bore and end face of shafts and disks,th...

... Machine CW61125D Load Bearing 6T Spindle Bore Diameter 120mm Heavy The machine is mainly responsible for a variety of turning wo...

... , module and inch , as well as drilling and pull oil slot . Width of bed is wider than normal machine , with high hardness on guidew...

... steel, aluminum, brass, and plastic. It is used in , CNC , and other turning machines. The tool is made of tungsten carbide, wh...

... CW61110Q machine Product Application The horizontal machine is mainly suitable for cutting the workpiece inside and outsid...

... machine flat bed SPECIFICATIONS Units Q1319 Q1322 Swing over bed mm 630/800 630/800 Swing over cross slide mm 340/520 340/520 Dist...

1. Suitable for turning internal and external cylindrical surfaces, end faces, tapered surfaces and metric and imperial threads, etc. 2. Widely used a...

... Engine Conventional Machine for turning Cylinder Conventional , Machine, Roll turning , CNC , Gantry Milling Mach...

... small bevel teeth and a pair of jaws. The four small bevel teeth are engaged with the coil wire, the back of the coil wire has a flat struc...

... 330mm Maximum processing length 1500mm Maximum machining diameter 630mm Chuck Front and rear 500mm four- jaw chuck Tool holder 4-station el...

14N10UN Manual CNC Thread Cutting End Mill Carbide Cutters For Lathe Special inserts requirement: We not only produce the standard types, but also the...

Chamfer type B, 4 - 5 threads with progressive tap and interrupted threads Operation method Threading machine,CNC lathe,Milling and drilling machine,L...

Precision Heavey Duty Metal Processing Lathe Heavy Duty Metal Lathe SN50Cx1000/1500/2000 Specification: Max. Swing Over Bed : 500mm Max. Swing Over Ca...

Chamfer type B, 4 - 5 threads with progressive tap and interrupted threads Operation method Threading machine,CNC lathe,Milling and drilling machine,L...

... ISO-C11 or D11 spindle taper 115mm spindle speed (ccw/18)9-1275rpm (cw/4)16-816rpm feeder ranges 0.5...

... for bicycle single or multi fly wheel parts CNC suits for the mutlti fly wheel parts turning with function. It has 2 option in t...